Fall Protection in Three Steps: Plan, Provide, Train

Falls are the leading cause of death in the construction industry.  According to the Bureau of Labor Statistics National Census of Fatal Occupational Injuries in 2012, falls to a lower level accounted for 544 construction fatalities. Preliminary OSHA reports for January, 2014, show numerous fatalities from falls, including a Clinton, Iowa, Wal-Mart worker who fell from a ladder, an iron worker in Seattle who fell from a scaffold, and two Montgomery, Alabama, bridge workers who fell from an aerial platform.

Now more than ever it is essential for employers with personnel who work at heights or near ground or wall openings to provide comprehensive fall protection. Last year 8,241 fall protection citations were issued by OSHA, placing fall protection at #1 on OSHA’s 2013 Top 10 list of the most cited violations for the second year in a row.

Clearly employers need to implement stronger fall protection programs to increase worker safety and to help lower these grim statistics. The Occupational Safety and Health Administration, in partnership with the National Institute for Occupational Safety and Health (NIOSH) and National Occupational Research Agenda (NORA) – Construction Sector, has been waging a nationwide outreach campaign to raise awareness among workers and employers about common fall hazards in construction, and how falls from ladders, scaffolds and roofs can be prevented.  As OSHA highlights in its outreach campaign, falls can be prevented and lives can be saved through three important and highly effective steps: Plan, Provide and Train.

PLAN ahead to get the job done safely

A well-designed, written fall protection plan is the first step towards reducing risk and saving lives. OSHA mandates that the plan be developed by a qualified person with relevant knowledge and training to successfully implement an appropriate fall protection program.

An effective process for implementation of a successful fall protection plan would include:

  • Performing a thorough hazard analysis to determine the areas of risk;
  • Engineering out the hazards if possible;
  • Implementing fall prevention systems such as guardrails, handrails and warning lines wherever possible;
  • Selecting appropriate fall arrest equipment;
  • Developing contingency plans and determining appropriate rescue equipment;
  • Designing and delivering a comprehensive training program on all aspects of fall protection and rescue.

A complete fall protection plan should include a statement of company policy, a detailed list of fall prevention measures and delegation of ongoing responsibilities to a fall protection competent person to oversee inspection, record keeping, maintenance, equipment replacement, incident reporting, enforcement, accident investigation and training.

PROVIDE the right equipment
Workers who are six feet or more above lower construction levels are at risk for serious injury or death if they should fall. To protect these workers, employers must provide the right fall protection equipment for the job, including the right kinds of ladders, scaffolds and safety gear. If workers use personal fall arrest systems (PFAS), proper fit is important, and a harness should be provided for each worker who needs to tie off to an anchor.  All fall protection equipment should be inspected regularly to ensure it’s in good condition and safe to use.

TRAIN everyone to use the equipment safely

Falls can be prevented when workers understand proper set-up and safe use of equipment.  Hands on training must be provided to every employee who might be exposed to fall hazards. The training should enable workers to recognize the hazards of falling and instruct them on the procedures to be followed for each type of fall protection. Fall protection training should include time to learn and demonstrate the skills needed to effectively use all required equipment. A written test as well as performance testing on the equipment and the systems being used should be administered at the conclusion of training.

OSHA has provided numerous materials and resources to train workers on safe practices to avoid falls in construction.

Employers who design a thorough fall protection plan, provide the right equipment and train their workers on hazard awareness and the proper use of safety equipment will be well on their way to establishing a workplace that greatly reduces falling hazards, complies with OSHA standards and ultimately saves lives.

The OSHA Training Center at Chabot-Las Positas Community College District offers a full range of standards based safety and health training vital to a safe and healthy workplace. Upcoming OSHA Training Center fall protection courses include Fall Hazard Awareness for the Construction Industry – OSHA 7405 and Fall Arrest Systems – OSHA 3115.  Other programs offered include OSHA safety standards, Outreach Trainer courses, Cal/OSHA standards curriculum, environmental courses and customized onsite safety training.  For more information, including a complete course schedule, visit www.osha4you.com or call (866) 936-OSHA (6742).

Comments

  1. Thanks for sharing this guide on keeping construction workers protected. It really is important that you keep the work site very safe. Having the right equipment is probably one of the best ways to keep your team protected as well. It’ll help ensure that even if someone messes up, they’re still safe.

  2. Thank you for writing such a fantastic info about fall protection, Keep sharing these type of informative blog.

Speak Your Mind

*